Product General and Technical Information
Date: 10/03/2017
Name: Cross-Linked Polyethylene Foam
General Information
Cross-Linked Polyethylene foam is a good-quality foam with a firm feel. Common applications can be found Here.
Cross-Linked Polyethylene foam is a good-quality foam with a firm feel. Common applications can be found Here.
Property | Test Method | 2.0 LB | 3.0 LB |
Density (LB/Cubic Ft.) | ASTM D3575 | 2 | 3 |
Tensile Strength (PSI) | ASTM D3575 | 55.4 | 70.4 |
Tear Resistance (lbf/in) | ASTM D3575 | 12.5 | 17.7 |
Elongation at Break (%) | ASTM D3575 | 290 | 319 |
Shore Hardness (00 or A) | ASTM D2240 | 50 (00) | 58 (00) |
Compression Deflection
25% (PSI) 50% (PSI) |
ASTM D3575 | 8.2 17.1 |
10.5 19.8 |
Compression Set 25%, 1/2 hr (% Max) 25%, 24 hr (% Max) 50%, 1/2 hr (% Max) 50%, 24 hr (% Max) |
ASTM D3575 | 18 7 42 16 |
--- --- 32 13 |
Working Temperature Range (°F) | Internal | -76 to 194 | -94 to 194 |
Water Absorption, 7 days % Vol (max)) | Internal | 1 | 1 |
Thermal Conductivity, 176°F (80°C) (BTU·in/hr·Sq.Ft·°F) |
ASTM C177 | 0.26 | --- |
Flammability, >1/4" (4"/min) | FMVSS302 | PASS | PASS |
Thermal Stability, 24hrs at 158°F (70°C)(%) | ASTM D3575 | 2 | 2 |
Property | Test Method | 4.0 LB | 6.0 LB |
Density (LB/Cubic Ft.) | ASTM D3575 | 4 | 6 |
Tensile Strength (PSI) | ASTM D3575 | 99.0 | 137 |
Tear Resistance (lbf/in) | ASTM D3575 | 21.8 | 30.1 |
Elongation at Break (%) | ASTM D3575 | 306 | 268 |
Shore Hardness (00 or A) | ASTM D2240 | 71 (00) | 27 (A) |
Compression Deflection
25% (PSI) 50% (PSI) |
ASTM D3575 | 21.2 31.8 |
25.2 37.7 |
Compression Set 25%, 1/2 hr (% Max) 25%, 24 hr (% Max) 50%, 1/2 hr (% Max) 50%, 24 hr (% Max) |
ASTM D3575 | 10.0 3.5 28.5 12.5 |
8 3 23 11 |
Working Temperature Range (°F) | Internal | -76 to 194 | -76 to 194 |
Water Absorption, 7 days % Vol (max)) | Internal | 1 | 1 |
Thermal Conductivity, 176°F (80°C) (BTU·in/hr·Sq.Ft·°F) |
ASTM C177 | --- | --- |
Flammability, >1/4" (4"/min) | FMVSS302 | PASS | PASS |
Thermal Stability, 24hrs at 158°F (70°C)(%) | ASTM D3575 | 2 | 2 |
Property | Test Method | 8.0 LB |
Density (LB/Cubic Ft.) | ASTM D3575 | 8 |
Tensile Strength (PSI) | ASTM D3575 | 251.8 |
Tear Resistance (lbf/in) | ASTM D3575 | 37.4 |
Elongation at Break (%) | ASTM D3575 | 228.8 |
Shore Hardness (00 or A) | ASTM D2240 | 83 (00) |
Compression Deflection
25% (PSI) 50% (PSI) |
ASTM D3575 | 37.4 63.0 |
Compression Set 25%, 1/2 hr (% Max) 25%, 24 hr (% Max) 50%, 1/2 hr (% Max) 50%, 24 hr (% Max) |
ASTM D3575 | --- --- 19.4 10.2 |
Working Temperature Range (°F) | Internal | -40 to 212 |
Water Absorption, 7 days % Vol (max)) | Internal | --- |
Thermal Conductivity, 176°F (80°C) (BTU·in/hr·Sq.Ft·°F) |
ASTM C177 | --- |
Flammability, >1/4" (4"/min) | FMVSS302 | PASS |
Thermal Stability, 24hrs at 158°F (70°C)(%) | ASTM D3575 | --- |
All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.
Copyright © 1997-2024 The Foam Factory. All rights reserved.