---

Source	Specification	IG2	Comments
ASTM	ASTM D1056-07	2A2 / 2C2 / 2B2	Additional (optional) suffixes can be added
ASTM	ASTM D 6576-07	Type II, Grades A & B, Condition Soft-Medium	Formerly MILR6130-C
CAL	CAL 117	Pass	Flame resistance
Chrysler	Chrysler MSZ-75 J18	2A2 / 2C2 / 2B2	Additional (optional) suffixes can be added
Chrysler	Chrysler MS JP9-4	Meets at most thicknesses	Flame resistance (horizontal burn rate)
Federal	FMVSS-302	Meets at most thicknesses	Flame resistance (horizontal burn rate). See note 1
Federal	FAR 25.853	Pass at 1/8" and 1/4"	12 Second Vertical Burn Test. (Test report aviliable upon request)
FORD	FORD WSK M2D 419-A	Type 3	See note 2
GM	GM 6086-M	Type II	CD tested at 50% deflection. See note 3
GM	GM 6090-M	(B4A) Meets at most thicknesses	Flame resistance tested per GM 9070-P (horizontal burn rate)
GM	GMN11106	Type II	CD tested at 50% deflection. See note 3
GM	GMW15473	Class I Type IV	CD tested at 50% deflection. See note 3
ISO	6916	2A2 / 2C2 / 2B2	No exceptions
Military	ASTM D 6576-07	Type II, Grades A & B, Condition Soft-Medium	Formerly MILR6130-C
SAE	SAE J18 APR2002	2A2 / 2C2 / 2B2	Additional (optional) suffixes can be added
SAE	SAE J369	Meets at most thicknesses	Flame resistance (horizontal burn rate)
SAE	SAE J 1351	Pass, rating 2	Odor specification
Toyota	TSM 1501G	2A2 / 2C2 / 2B2	No exceptions
Toyota	TSM 0500G	Meets at most thicknesses	Flame resistance (horizontal burn rate)
UL	UL94 5VA	5VA UL Listed at 6.2 mm (.244") and higher	Flame resistance specification. (UL file# QMFZ2.E55798).
UL	UL94 5VB	5VB UL Listed at 6.2 mm (.244") and higher	Flame resistance specification. (UL file# QMFZ2.E55798).
UL	UL94 V-0	V-0 UL Listed at 6.2 mm (.244") and higher	Flame resistance specification. (UL file# QMFZ2.E55798).
UL	UL94 V-1	V-1 UL Listed at 6.2 mm (.244") and higher	Flame resistance specification. (UL file# QMFZ2.E55798).
UL	UL94 HF-1	HF-1 UL Listed at 1.7mm-3.8mm (.067" - .149")	Flame resistance specification. (UL file# QMFZ2.E55798).
UL	UL94 HBF	HBF UL Listed at 3.9mm (.153") and higher)	Flame resistance specification. (UL file# QMFZ2.E55798).

Note 1: A number of horizontial burn tests can also be listed (GM 6090, BMW, Volvo, Etc.). Request additional information

Note 2: For all FORD WSK M2D 419-A callouts, request full information for each product due to some exceptions with non-tested staining requirements

Note 3: For all GM 6086-M, GMN11106 & GMW15473 callouts, the foam grade certifies to the "basic" requirements only. Request additional information for each product. Providing application (interior, exterior or under-hood) and part thickness is helpful.

All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.